lldp:Inst

Link Layer Discovery Protocol (LLDP) supports a set of attributes that it uses to discover neighbor devices. These attributes contain type, length, and value descriptions and are referred to as TLVs. LLDP supported devices can use TLVs to receive and send information to their neighbors. Details such as configuration information, device capabilities, and device identity can be advertised using this protocol.

Telemetry Sensor Path(s)

Configurable Properties
PROPERTY NAME DATA TYPE DESCRIPTION PERMITTED VALUES
adminSt nw:AdminSt
(scalar:Enum8)
The administrative state of the object or policy. SELECTION:
1 - enabled
2 - disabled
DEFAULT: enabled
ctrl nw:InstCtrl
(scalar:Bitmask64)
The control state. SELECTION:
1 - stateful-ha
DEFAULT: normal

Operational Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
operErr nw:OperErrQual
(scalar:Bitmask64)
Operational Errors Qualifier SELECTION:
1 - init-err
2 - mem-err
4 - ipc-err
8 - int-err
16 - sock-err
32 - proto-err

Internal Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
holdTime lldp:HoldTime
(scalar:Uint16)
The hold time (in seconds) that a receiving device should hold the information sent by your device before discarding it.
RANGE: [10 , 255]
DEFAULT: 120
initDelayTime lldp:InitDelayTime
(scalar:Uint16)
The delay time (in seconds) for LLDP to initialize on any interface.
RANGE: [1 , 10]
DEFAULT: 2
modTs mo:TStamp
(scalar:Date)
The time when this object was last modified. SELECTION:
0 - never
DEFAULT: never
name naming:Name256
(string:Basic)
The name of the object.
MAX SIZE: 127
DEFAULT: bgp-PeerAf
optTlvSel lldp:OptTlvSel
(scalar:Bitmask16)
The selectors for optional TLVs according to the LLDP protocol (802.1AB) specifications. SELECTION:
0 - unknown
1 - port-desc
2 - sys-name
4 - sys-desc
8 - sys-cap
16 - mgmt-addr
32 - port-vlan
DEFAULT: port-desc,sys-name,sys-desc,sys-cap,mgmt-addr,port-vlan
status mo:ModificationStatus
(scalar:Bitmask32)
Modification status SELECTION:
2 - created
4 - modified
8 - deleted
16 - replaced
sysDesc naming:Descr
(string:Basic)
System description.
MAX SIZE: 128
txFreq lldp:TxFreq
(scalar:Uint16)
The transmission frequency of LLDP updates (in seconds).
RANGE: [5 , 254]
DEFAULT: 30